Teamlink Ethernet to V35 Converter will convert the Ethernet into V35 Protocol Level signal for connecting to the V35 Modems.
It Can be configured in bridge Mode as well as in routing Mode
Teamlink Ethernet to V35 Converter will convert the Ethernet into V35 Protocol Level signal for connecting to the V35 Modems.
It Can be configured in bridge Mode as well as in routing Mode
In Bridge Mode HDLC framing will be sent over the V35 Interface with the CRC-16 for compatible with the Central MPLS Router
In Routing Mode Static Routing with the PPP Encapsulation
Easy Menu Driven Software For the Configuration and Status Monitoring
ICMP Ping Request and Replay for Easy Diagnostics
Managed Ethernet Port For the status monitoring and configuration in Telnet, SNMP
Automatic Detection of the Clock speed
DCD, DSR, CTS Control Signal Indication for the DSL Line UP and Down Condition. And Serial Interface Checking.
Loop back Detection at the DSL Level
Dual AC and DC power supply input from the Same Socket.
Complied according to the IEEE802.3
10Base-T and 100Base TX Support
Mac Address Filtering
Auto MDI-X Support
Automatic clock Recovery and will adjust to the clock speed
Recovered From V35 Modem
Internal Clock
ARP, RARP, ICMP
PPP, LCP, IPCP, IP
IPv4, TCP, UDP,TFTP
Interface Type:V35
Connector:DB25 Pin Male and Cable will be supplied with the Router for connecting the Modem ( MLLN or Leased Line Modems V35 Female Port )
Clock Modems: Recovered and Internal
Speed : From 64Kbps to 2048Kbps ( Automatically detects the clock Rate )
DCD, DSR, CTS Control Signals Indication for the Serial UP or DOWN Condition checking.
ICMP Request using the trace Route Menu.
Bridging Mode
Static Routing
Console
Telnet
SNMP
Through the Serial Port Using the X-Modem Protocol
Using the TFTP over Ethernet Port
PWR,DTR, RTS, DCD, DSR, CTS, ALM, ETH_LINK, ETH_SPD, PPP_LNK
48V DC and 230V AC Dual power supply.
Redundant Power supply is ordering time option. Redundancy of 5V DC for the Primary Power supply so that we can Connect External 5V Power Adaptor in case of Internal Power supply Fails.
Operating Temperature -5 to +55C
Operating Humidity 5% to 99%
Rugged Metallic Aluminum Casing as for the Field Conditions.
Mac Address Filtering (LAN Interface)
Auto MDI-X Support
Automatic clock Recovery and will adjust to the clock speed
Internal Clock
Interface Type:V35
Connector:DB25 Pin Male
Clock Modems: Recovered and Internal
Speed : From 64Kbps to 2048Kbps (Auto detect)
Bridging Mode, Static routing(routing protocols)