RS232 to E1(G.703) interface converter will converts RS232 Asynchronous data into 2.048 Mbps E1 data or Nx 64 Kbps E1 data. It supports both frame and Un frame operations over E1 channel.
RS232 to E1(G.703) interface converter will converts RS232 Asynchronous data into 2.048 Mbps E1 data or Nx 64 Kbps E1 data. It supports both frame and Un frame operations over E1 channel.
Convert RS232 interface to E1(2M unframed G.703) interface
Support line recovery clock ,local clock and equipment clock
Support E1 port loop
E1 (G.703 ) interface support 120ohm (RJ45) and 75ohm (BNC double coaxial)
Line Rate : 2048 Kbps
Line Code : HDB3
Interface : E1 Interface as per ITU-T G.703, G.704
Impedance : 120 Ohms(Balanced), Optional : 75 Ohms(Unbalanced)
Connector : RJ45 for Balanced and BNC for Unbalanced
Clock Mode : Internal clock or G.703 Recovered clock
Framed and Unframed Operation
User selectable CRC-4 Generation and Detection
Rs232 interface rate : 9600 Kbps, 19200 Kbps, 38400 Kbps, 56000 Kbps, 115200 Kbps
Even or Odd parity selection.
RS232 port protection : 600W surge protection, 15KV static protection
RS232 port connector DB25 female
PWR, E1 Sync, AIS, TD, RD, TST.
DUAL MODE AC/DC, 230VAC +/- 10% & –48VDC +/-10%
-5 To 50°C.
Upto 95% non condensing at 35°C
Support E1 port loop
E1 (G.703 ) interface support 120ohm (RJ45)
75ohm (BNC double coaxial)
Line Rate : 2048 Kbps
Line Code : HDB3
Interface : E1 Interface as per ITU-T G.703, G.704
Even or Odd parity selection.
Impedance : 120 Ohms(Balanced), Optional : 75 Ohms(Unbalanced)
Connector : RJ45 for Balanced and BNC for Unbalanced)