TEAMLINK Bridging Terminal server is a versatile and high performance system that provides the 4/8/16 asynchronous RS232 ports, One console port and 4 port built-in Ethernet switch.
It enables the users to remotely login the system using the rlogin and telnet and TCP/IP network over the V.35 Interface
Connecting the RS232 Terminal Ports using the TCP/IP protocols
Connecting through the Telnet and Remote Login using the TCP/IP Protocols over the 10/100 Mbps Ethernet Interface
Connecting the Remote Host systems after power on using the implicit connections
15KV ESD Protection on Each Terminal port for the Rugged Operating conditions
Configuration and status Monitoring is from menu driven console and Telnet port with the multiple telnet sessions
1500V AC Isolation protection on Transmit, Receive and Ground connections of all Asynchronous ports
Supports Answer back codes on each terminal ports
Supports Answer back code Enable and Disable Facility for each Terminal Port
Supports TCP Client and Server , Telnet client and Server Options, Rlogin client
Implicit , Fixed, switched Mode of configuration on each Terminal Port
Domain Name Service Facility enables flexible host name to IP address mapping from DNS servers
Facility to switchover from One server to another server in case of failure
The unit works in PRS/UTS environment of Indian Railways
The unit can be used as a local Terminal Server for RS232 and Ethernet DTEs or as a Remote Terminal Server with Bridging for RS232 and Ethernet DTEs
Number of Ports: 4/8/16
Compliance :RS232 Asynchronous
Connector Type: RJ45 with the TXD, RXD, GND signals
Terminal Port Speed : Speed 4800 bps to 115200 bps (Selectable)
Indications: Transmit and Receive
Implicit or switched Mode of connections between each Terminal port and the Host.
Supports Multiple Sessions and Each Terminal Port will supports 8 sessions
Allows the switching between Multiple sessions
Status Display of Each Terminal Ports for the Sessions status and current sessions
Ports Statistics ( Over run errors , Parity Errors etc )
1500 VAC Isolation Protection on each Terminal Port
TCP, IP
ARP, RARP,TFTP
ICMP, IGMP
PPP,RTP
Supports WAN Protocols SLIP, CSLIP
TELNET Client, RLOGIN Client, TCP Client, TELNET Server B12TCP Server
Built in 4 Port Ethernet Switch
Supports Auto negotiation on each port
Supports 10 Mbps and 100 Mbps speeds According to the ITU-T 802.3 u
10Mbps / 100Mbps Half Duplex / Full Duplex Flow control Operation
Compliant to IEEE802.3 and IEEE802.3 u, IEEE802.3x 100 Base-TX standards
Supports Auto Cross Over and Auto MDI-X Option
RJ 45 Connector
Having the Speed and Ethernet Link/ Activation (Data Traffic Activity) on Each Port for easy visual checking of the port speed and Link status
Port Statistics : Transmit and Received packets Transmit and Received errors
Port Status : Port Name, Link-Up/Down/Disable speed, Half/Full duplex
No. of Bridging Ports : 1
Interface Type : V35 Interface for connecting to external leased line Modem (MLLN or traditional)
Connector Type : DB25 Pin/V35 Connector
Data Rate Supported : Supports Nx64 Data Rate from 64 Kbps to 2048Kbps
Speed : 64K bps to 2 Mbps
Speed Adopted to the Clock Rate of the V35 Interface. Does not require the speed configuration to the V35 Interface
Indications : DTR,RTS,DSR,CTS
Receive Clock Polarity change Option for the compatibility with different makes of V35 Modems
Transmit, Receive, Link status
Configuration and Status Monitoring of the Terminal Server using Menu driven console or by TELNET over the network Supervisory using the 9.6Kbps, 8Bit no parity RS232 Port
The RS232 Console/ Supervisory is compliant with the ITU-T V.24 / EIA RS232 Asynchronous Format
Allows the Multiple Telnet sessions for the concurrent Operations from different administrators
Menu based, Self guided Password Protection on the console and Telnet to prevent the unauthorized person’s login into the terminal servers
Firmware Up gradation is using the FTP Protocol
Local Prompt on each Terminal Port
Character Format : Min 4800 bps to Max 115200 bps (Selectable)
Connector : RJ-45 Socket
Supports SNMP V1 and V2
Port Level Statics, Diagnostics & Monitoring facility
Port reliability feature
Sending the Message on Terminal Ports
Port Level Error statistics Parity Errors, Over Run Errors etc
Trace Route from Console and the Each Port for easy checking of the Ethernet connectivity from Terminal server to the Remote Host.
Ping facility from Terminal Ports
Transmit and Receive on each RS232 Terminal Port
Link and Speed on each Ethernet Port
190V AC to 270V AC Operation.
47Hz to 53Hz Frequency.
Redundant Power supply is an ordering time Option.
Operating Temperature : -5 to +55°C
Operating Humidity : 5% to 99%
Rugged Metallic Aluminum Casing
19” Rack Mountable system 1U Height
Number of Ports:16
190V AC to 270V AC Operation.
47Hz to 53Hz Frequency.
Protection : 15KV ESD Protection on Each Terminal Port
Supports 10 Mbps and 100 Mbps speeds According to the ITU-T 802.3 u
Port Based VLAN
Compliance :RS232 Asynchronous
Supports SNMP V1 and V2
Built in 8 PORT Ethernet switch ordering time Option