Teamlink 3002FC E1 to V.35 Interface Converter provides an economical digital access solution for unframed & framed E1 (Fractional E1) network services.
Aflexible industry standard for G.703 (E1) & V.35 devices which may be linked to a Teamlink 3002FC at data rates of 64Kbps to 2048Kbps.
User data is placed into the E1 frame, using only the required number of time slots. The main E1 link may be clocked from the recovered receive clock, from the data port clock or from the internal clock.
Framing : Unframed, Framed
Bit Rate : 2.048Mbps
Line Coding : HDB3
Line Impedance : 120 ohms,75 ohms (Optional)
Interface Connectors : RJ – 45/Terminal Block, Two BNC Connectors (Unbalanced-Optional)
Complies With : ITU G.703 and G.704.
Supports Cascading to connect several DTEs to single E1 channel
User Interface : V.35, V.36
Interface Connector : 34 pin female
Line Code : NRZ
Data Rate : 2048Kbps unframed, nx64Kbps framed
Clocks : Internal Clock, Recovered Clock and External Clock.
Control Signals : CTS, DSR and DCD
LL : Local loopback Activation Through V.35.
DL : Digital loopback Activation Through G.703.
RL : Remote loopback
PATT : Pattern Generation Activation Through Built-in BER
SYNC,RAI,AIS,E1 LOSS,PATT,ERR,TST,TD,RD,DTR,PWR
Operating Voltage : 230 VAC 50Hz,or -48V DC
Temperature : -5°C to 50°C
Humidity : 0-90% non-cond.
Bit Rate : 2.048Mbps E1 Interface (G.703)
Line Coding : HDB3
Line Impedance : 120 ohms,75 ohms (Optional)
User Interface : V.35, V.36
Interface Connector : 34 pin female
Data Rate : 2048Kbps unframed, nx64Kbps framed
Internal Clock, Recovered Clock and External Clock
Control Signals : CTS, DSR and DCD
Operating Voltage : 230 VAC 50Hz,or -48V DC