Ethernet to RS232 Converter



G.SHDSL LINE INTERFACE

  • Line Type: 2 wire Single pair Operation
  • Line Code:TCPAM As per the ITU-T G991.2
  • Line Impedence:135 Ohms
  • Connector:RJ11
  • Transmit Signal Power :13.5dBm +/- 0.5dBm
  • Operating Range :6Km on 0.5mm diameter copper cable @2.048Mbps in 2 wire Operation and 11km on 0.5mm diameter copper cable @ 64Kbps speed.
  • Line Protection : As per the ITU-T K.20 and K.21
  • Line Coding : TCPAM-16 as per the ITU-T G991.2
  • Specifications: ANSI T1.601

DIAGNOSTICS

  • Local Loop back, Digital Loop back, Remote Loop back as per the ITU-T V.54
  • Built in test Patter Generation and checking
  • Diagnostics and status monitoring through the EOC channel without effecting the data transmission
  • Loop backs, Test pattern generation and checking are from the Web interface, CLI,SNMP and Telnet

MAINTENANCE

  • Firmware Upgradeable via FTP or HTTP
  • Statistics on DSL link and Data Ports
  • System Log

MANAGEMENT

  • Password Protection
  • PAP and CHAP support
  • Remote Access management via Telnet
  • SNMP MIB-II and Alarm traps
  • Firewall Security Packet Filtering
  • Denial of source Stateful Packet Inspection ( SPI ) Attack alert and Log Access control Real time Log
  • Web based GUI and CLI,SSH

ROUTING PROTOCOLS

  • MAC bridging (IEEE802.1D)
  • PPP Routed
  • IP Support ARP,RARP,ICMP,TCP,UDP,
  • Static Routing,RIPv1,RIPv2
  • DHCP Client and Server Functionality and DHCP Relay
  • VPN Pass through and IPSec and L2TP.

Operating Requirements

  • Operating Temperature 0C to +50C
  • Operating Humidity 5% to 90 %