10/100/1000 Base-T IEEE802.3 compliant

SFP Based optical port or SC Type

Fiber Interface consist of 1000 Base-X / 100 Base-X Link up for 1000Base-T link up / 10 Base-T 10Base-T and Fiber link detection

Supports Auto Negotiation

Copper Port is having the Auto MDIX Function for Auto TX/RX swap by strapping –pin

Handles Jumbo Frames upto 10Kbytes

LED INDICATION:

Copper LINK and ACTIVATION LED and 10Mbps or 100Mbps or 1000Mbps SPEED LED

FIBER LINK UP or DOWN LED INDICATION

POWER: Power Supply ON and OFF Condition

CONNECTORS:

Rj45 Connector for the Copper PORT

SC Type For the Fiber Optical Port

FIBER OPTICAL PORT SPECIFICATIONS:

Optical Mode: : Single Mode or Multimode.

Wavelength : 850nm/ 1330nm/ 1550nm.

Mode : Single or Duplex Mode ( Single Fiber or Dual Fiber).

COPPER PORT SPECIFICATIONS:

Auto Negotiation : If Enabled the Media converter uses 802.3u Auto Negotiation on the TX Inter face. If Disable the PORT Settings are according to the configuration either speed, Duplex and Flow Control.10/100/1000 Base-T IEEE802.3 compliant SFP Based optical port or SC Type Fiber Interface consist of 1000 Base-X / 100 Base-X Link up for 1000Base-T link up / 10 Base-T 10Base-T and Fiber link detectionSupports Auto Negotiation Copper Port is having the Auto MDIX Function for Auto TX/RX swap by strapping –pinAnchoring Next Generation NetworksKey FeaturesLED INDICATIONTECHNICAL SPECIFICATIONSport is always shows the LINK UP and DOWN STATUS.

Speed : 10Mbps or 100Mbps or 1000Mbps

Duplex: Half Duplex or Full Duplex (Default)

Flow Control: : Enable(Default) or Disable

POWER SUPPLY

In Built 230V AC and 48V DC From a Single Socket

The Inbuilt Power Supply will have the bridging circuit for detecting the AC and DC power supply Automatically.

POWER SUPPLY

Operating Temperature : 0 to 55°C

Humidity : 5% ~90% non-condensingp>

Storage Temperature : -40 to 70°C

ORDERING DAISY-G

Single Mode Dual Fiber

Single Mode Single Fiber