Power distribution unit (PDU) is a device fitted with multiple outputs designed to distribute electric power, especially to racks of computers and networking equipment located within a data center.[1] Data centers face challenges in power protection and management solutions.
Each power OUT LET can be switched ON,OFF and Reboot
Each Unit which is connected to the Outlet of the PDU can be rebooted from the remote place without the interference of the MAN.
Managed PDU be accessed through Three Interfaces, Menu driven RS232.
Serial Interface, Telnet, Web Interface and also from the Proprietary SNMP MIBS.
Can be configured using the Standard EMS software through the MIBS.
Alarms can be configured for the Reboot.
All alarms can be sent to the Manager IP address.
Multiple users can be logged, Minimum 5 users are allocated.
Can change the username or passwords at any time in the administrative mode.
All outlets are configured for any user name specific so that user can know where the each outlet has connected.
RS232 Serial.
Telnet:Out of band Menu driven Serial Interface through the standard Telnet session.
SNMP:Full Read and write capability of converter through the MIB browser.
Proprietary MIB-II Supported.
Rack Distribution Units where the Power ON and OFF of the Units required more frequently.
Central Aggregation station to connect all the Network node through the Power Distribution Unit.
230V AC INPUT 80A.
Each OUTLET can drive up to 10A AC current on 230V AC.
DFDG
Each port ON or OFF Indication on front panel.
Reset of the Management Unit can be done using manually through the push button on front panel of the Rack or can be reset by the TELNET or WEB INTERFACE.
RS232 Serial
Proprietary MIB-II Supported.
230V AC INPUT 80A(Power Inlet)
DFDG (Power outlet)
Each OUTLET can drive up to 10A AC current on 230V AC.
Telnet:Out of band Menu driven Serial Interface
Reset of the Management Unit
Each port ON or OFF Indication on front panel.
SNMP:Full Read and write capability of converter