G.SHDSL LINE INTERFACE :

Line type : 2 or 4 Wire twisted copper wire of 0.5mm Diameter

Line Code : TCPAM as per the ITU-T G991.2 ( Annex –A and Annex –B ).

Bandwidth : Operates From 64Kbps to 2048Kbps

Line Impedance : 135 Ohms

Transmit Signal Power : 16 dBm +/- 0.5dBm

Operating Range in 2 Wire : 6 Kms. on 0.5mm diameter copper cable @ 2.048Mbps data rate

Operating Range in 4 Wire : 8 Kms. on 0.5mm diameter copper cable @ 2.048Mbps data rate

Operating Mode : 2Wire or 4 Wire selection through DIP switches

Line protection : As per ITU-T K20 and K21

Transmit Level : Upto 16dBm

Connector : RJ 45

Surge Protection : Internal and Optional External Surge Protection

V35 INTERFACE SPECIFICATIONS :

Interface : V35.

Data Rates : 2.304 Mbps (n*64 Kbps, n=1 to 36) .

Transmit Clock Modes : Internal/External/Recovered from line

Connector : V34pin Pin Female Connector

Configuration : Through DIP Switches

Clock Polarity Selection : RXCLK and TXCLK

Diagnostics:

Local Loopback, Digital Loopback and Remote Loopback as per the ITU-T V.54 standard.

All loop back tests and BERT should be operated through Front Panel switches.

Built in test 511 pattern generation and checking (BERT) for the DSL Line as well as the PCM E1 Checking.

End to End Diagnostics and Status Monitoring is through the Embedded Operation Channel EOC without Interrupting the Data

MODEM CONFIGURATION AND STATUS MONITORING:

Modem Configuration Through Dipswitches.

MODEM LED INDICATIONS:

PWR, MR, COT, DSL LINK, DTR, RTS, PAT, ERR, TST

POWER SUPPLY FOR BOTH THE G703 AND V35 MODEM :

DUAL MODE AC/DC, 230VAC +/- 10% & –48VDC +/-10%

TEMPERATURE :

-5 To 60°C

HUMIDITY:

Upto 95% non condensing

LINE PROTECTION:

As per ITU K.20/K.21

s