Text Here
Text Here
Built-in Four Port Ethernet
Manual and Adoptive speed configurations over SHDSL Line
Supports 4Kms. at 5.7Mbps speeds and 10Kms. at 192Kbps speeds
End to End EOC monitoring for the Loopbacks and Status Monitoring
Remote Ethernet Ports Status Monitoring through EOC channel without interrupting the data path
Supports EFM Bonding over the SHDSL lines
Supports All Annexes of SHDSL Lines
Supports TCPAM-16/32/64/128
Line type : 2Wire (single pair operation)
Line Code : TCPAM as per the ITU-T G991.2
Line Impedance : 135 Ohms
Connector : RJ45
Transmit Signal Power up to : 16.8dBm
Line protection : As per ITU-T K20 and K21
Specification : ANSI T1.601
Line Probe : Enable and Disable Function Enables the automatic Speed Adoption facility
Distance : Supports 4Kms. at 5.7Mbps, 10Kms. at 192Km, 6Kms. at 2Mbps Speeds
No. of Ethernet ports : 4 (4 Port Switch), RJ45 connectors for UTP cables
Interface Compliance : IEEE802.3 Compliant
10Base-T and 100Base-TX support
High Performance Look up engine with the support for 1024 MAC address entries with the automatic learning and aging
Each Ethernet Port statistics Transmit, Receive, Error, FCS, Packets Display
Bridging Protocol Supported: Ethernet Over First Mile EFM Protocol
Supports Auto negotiation and the Auto Cross Over for each and every port
Supports Speed, Link and Activation on each Port
Menu Driven Console from RS232 Serial Port Operating with the 9600Baud Rate
Supports Telnet, SNMPv1, SNMPv2
Supports HTTP for configuration and Status Management of the SHDSL line as well as the Four port Ethernet switch
Baud Rate: 115.2Kbps, 8, N, 1 Format
Supports VT100 Emulation with the Menu driven Self Guided
PWR, COT/ RT, DSL_LNK, TEST, ALM, Ethernet Ports Speed, Link and Activation
Operating Voltage 230VAC 50/60 Hz Operation and 48V DC
Single Power Supply supports both the AC and DC voltages
Operating Temperature:-5 to 50 Degree Centigrade
Built-in Four Port Ethernet
Supports 4Kms. at 5.7Mbps speeds
Supports 10Kms. at 192Kbps speeds
Line type : 2Wire (single pair operation)SHDSL
Connector : RJ45
Supports Speed, Link and Activation on each Port
No. of Ethernet ports : 4 (4 Port Switch), RJ45 connectors for UTP cables
Supports Telnet, SNMPv1, SNMPv2
Supports VT100 Emulation with the Menu driven Self Guided