fabio_4cs

Product Overview :

FABIO4CS is a modular integrated Access TDM multiplexer with 512 x 512 cross connect ability, which integrates multiple dedicated data, voice and LAN channels over multiple main (network) links. It can provide maximum 4E1 or 8E1 capacity for accessing and transmission with cross-connect capacity is 512×512 64Kbps. It provides full range of voice and digital data services to subscribers located at different locations require to interconnect and establish a voice and data network over E1 & STM1 links.

The flexible, 1U high, 19-inch, 5-slot modular FABIO4CS chassis with a wide choice of I/O (user interface) modules is designed for applications ranging from small campus networks to multi-site corporate networks or extensive carrier access solutions. Due to FABIO4C's standards adherence, central office based cross-connect units (DACS) can separate voice and data, sending each to the appropriate carrier or service.

FABIO4CS enables carriers to successfully deploy bundled services and Internet access. The integration of a broad range of services makes FABIO4CS a cost-effective access device, with reduced deployment and maintenance costs. The equipment conforms to international standards, ensuring compatibility in multi-vendor environments worldwide.

FABIO4CS is designed to carry Various Original Equipment Manufacturer’s Digital Axle Circuits over optical fiber (STM).


Features :

  • Compact 1U high, 19-inch chassis
  • Number of uplink-slots : 1
  • Number of service-slots : 4
  • Modular construction with four (4) slots for hot-swappable I/O modules
  • Max. E1 channels : 4 or 8E1 with (1+1) feature
  • Frame structure : Supports optional CRC-4 and PCM 30/31 settings.
  • Timing : Internal Crystal Oscillator clock, Clock received from any link (loopback)
  • Versatile 64Kbps User interface : Supports FXO/FXS Voice modules with caller number display, E&M 2/4-wire module with adjustable voice gain, hotline with standard signaling
    tone and V.24/RS-232 low speed module Max. FXO/FXS channels : 30 ~ 40 ; Max E&M channels : 24 ~ 32 ; Max V.35 channels : 3 ; Max FE channels : 3 ;
  • Performance Monitor: EMS available to monitor the equipment & configure
  • Customer service can be allocated by on-line network operator.
  • Flexible network topologies : Point-to-Point , Daisy Chain.
  • Local and Remote Telnet support
  • STM1 | STM4 : uplink module available

Technical Specifications

FABIO4CS

  • I/O modules : 4E1, FXO, FXS, Hot-line, 2/4W E&M, RS232/V.24, ETH, 8E1, STM1, C37.94
  • Chassis(height) : 1U, 19-inch wide
  • Number of Service-slots : 4 slots for I/O modules
  • Console port : 1 (RJ-45), Serial
  • Telnet port : 10/100Mbps (RJ-45), Ethernet

Voice Interface

  • Channel sampling rate : 8Khz
  • Commanding law : A-Law
  • Voice Interface : 2W , 4 W Signaling FXO, FXS, E&M
  • Frequency : 300 to 3400Hz
  • Impedance : 600Ohms
  • Ring current voltage : 75 ± 15V AC, 25 ± 3 Hz

Data Interface

  • Low speed data interface : RS232, V.24
  • Characteristic : ITU-T V.24
  • Data Format : Asynchronous, Synchronous
  • Asynchronous data : upto 19.2 Kbps
  • Synchronous data : 64 Kbps ~ 128 Kbps

V35 Data Interface

  • Characteristic : ITU-T V.35
  • Bit Rate : N x 64 Kbps, N=1~31

Ethernet Data Interface

  • Characteristic : IEEE 802.3
  • Bit Rate : N x 64 Kbps, N=1~31

Uplink Interfaces(E1)

  • Supports 512×512 cross connect ability based on 64K with signaling
  • Bit rate : 2048 +/- 50 ppm
  • Code : HDB3
  • Impedance : 120 Ohms Balanced
  • Electrical characteristics : ITU-T G.703
  • Transfer characteristics : ITU-T G.823
  • Jitter performance : ITU-T G.823

STM UPLINK

  • STM : STM1 SNCP

Disaster Management Communication (IR)

  • FABIO series devices are suitable for disaster communication for extending various services to mid-section in Indian Railways

Power Supply

  • AC : 100V ~ 240V AC (220V nom) DC to AC adaptor and DC : -36V ~ -72V (nom : -48V DC)

Environment

  • Operating Temperature : -5 to +55°C
  • Operating Humidity : 5% to 99%
  • Air pressure : 86 to 106 KPa