3 Interface Converter

Product Overview :

Teamlink 3301 E1 to E1/V.35/Ethernet Converter supports maximum speed of 2.048Mbps on any interface. It can be configured to use all three Interfaces (Sub E1, V.35 and Ethernet) simultaneously. Teamlink 3301 has user friendly Menu driven Console port for configuration, status monitoring and Diagnostics. The converter can also be managed through an additional Ethernet port using Telnet and SNMPv2.


Features

  • Interfaces : Main E1, Sub E1, V.35 and Ethernet.
  • All Interfaces can be configured to work simultaneously.
  • Time slot allocation for each interface in framed mode.
  • In unframed mode any one of the interface can be configured for Main E1 data path.
  • Supports Unframed and Framed Operation.
  • Complete Network Manageable using Console/Telnet/SNMP.
  • In-Band or Out-of-Band Management.
  • Local Loop, Remote Loop, Order Remote Loop and built-in pseudo random code Test function for easy installation & Mainatanence.
  • Supports unbalanced 75Ohm & 120Ohm balanced.
  • Ethernet Monitor self reset function.
  • 2 lines by 16 characters LCD display and 4 key keypad for user to operate.

Technical Specifications

Main E1 Interface

  • Channel Capacity : 01 Channel.
  • Framing / Unframing : Nx64Kbps, N=0`31.
  • Bit Rate : 2.048 Mb/s + 50 ppm.
  • Line Code : HDB3.
  • Line Impedence : 120 Ohm / 75 Ohm.
  • Connector : Rj45 or BNC.
  • Pulse Shape : ITU - T G.703.
  • Jitter Perfomance : ITU - T G.823,G.742
  • Clock : Inter Clock and Line Clock.
  • Output Jitter : <0.05 UI.

Sub E1 Interface

  • Nx64 Speed of Operation where N value is 1 to 32.
  • Unframed, PCM30 and PCM31 operational.
  • Compliance : G.703.
  • Data Rate : 2.048 Mbps.
  • Line Code : HDB3, AMI.
  • Max Frame Size : 1800 bytes.
  • Line Impedance : 120 Ohms, balanced / 75 Ohms unbalanced
  • System Clock : Internal or loopback timing.
  • Diagnostics :Remote and local loopback.
  • Connector : RJ-45.

V.35 Interface

  • DB34 Female Connector.
  • Nx64 Speed Selection.
  • Clock Recovered from Main E1/Sub E1/DTE/Local Oscillator.
  • Data Rates : 2.304 Mbps (nX64 Kbps, n=1 to 36).
  • Clock Modes : Internal clock, Line Recovered clock or External clock.
  • Connector : RJ45 for Balanced and BNC for Unbalanced.
  • Clock Mode : Internal clock or G.703 Recovered clock.
  • Framed and Unframed Operation.
  • User selectable CRC-4 Generation and Detection.

Ethernet Interface

  • Interface Rate : 10/100 Mbps.
  • Duplex: Half & Full Duplex self adapt.
  • Interface Character : Match IEEE802.3, IEEE802.1 Q(VLAN).
  • Connector : Rj45, Support Auto-mdix.
  • MAC Address Capability : 4096.
  • Routing protocol supported : RIP I, RIP II and static
  • WAN protocol supported : HDLC and PPP

Work Environment

  • Ambient Temperature: 0℃ to 50℃
  • Storage temperature: -20 ℃ to +70 ℃
  • Relative humidity: 5% to 90% (25% non condensed)

LED's

  • PWR, Main E1 LOS, Sub E1 LOS, DTR, RTS, LINK, SPD, TST, PAT OK, ERR

Power Supply

  • DC: -48V(-36 to -72V); +24V (Optional).
  • AC: 230 V AC; 50 Hz.
  • Power Interface : DC Power Terminal / AC Socket.
  • Power Consumption : <5 W.